Chrysler 300C & SRT8 Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter #1 (Edited)
Today I wired up the "reverse sense" wires from the Nav2Go unit to the reverse light circuit at the back so that the reverse cam will come on when I put the car in reverse. I know that someone on here had a problem with it blowing the fuse.. But so far, mine seems to be working fine and on cue...Mine is a 300C 2006 btw.

JonW, hurry up with your IPOD integration!!


jaydee
 

·
Registered
Joined
·
396 Posts
jaydee said:
Today I wired up the "reverse sense" wires from the Nav2Go unit to the reverse light circuit at the back so that the reverse cam will come on when I put the car in reverse. I know that someone on here had a problem with it blowing the fuse.. But so far, mine seems to be working fine and on cue...Mine is a 300C 2006 btw.

JonW, hurry up with your IPOD integration!!


jaydee
Did you install the NAV2Go or did you have to send them your nav radio to intergrate
 

·
Registered
Joined
·
268 Posts
Discussion Starter #3
nav2go

Yup,
Iinstalled the NAV2GO mod on my own- not a trivial job if you havent done fine soldering before- I used a pencil iron with the finest solder I could find..


Jaydee

MmoQUOTE=300MAG]Did you install the NAV2Go or did you have to send them your nav radio to intergrate[/QUOTE]
 

·
Registered
Joined
·
1,678 Posts
Every time I see this thread I click it thinking it's about some special "reverse" camshaft that is some special thing I've never heard of that makes gobs of power.
 
1 - 6 of 6 Posts
Top