Chrysler 300C & SRT8 Forums banner

Risk with ebay 22"s?

8608 Views 47 Replies 14 Participants Last post by  AWDRIVER
For the longest time, I had my heart on the 22" TIS 07's, then I realized that no one has them in stock, and ebay wants to get rid of 4 for 1800 without tires.. I bought a base model 300.. So i dont have the nice v8 to satisfy my crave for a little speed every now and then.. Knowing that I can buy an lt1 z28 for about the price of those rims + tires, I decided to just skip out and buy some ebay knock offs.

I found a set of 22s I liked, they claimed it fits a 300M, but I dont know if all the years are similar or what.. And im afraid of all this control arm mumbu jumbo, especially afraid of ebaying rims and they dont fit.

What they offer was 114.3x5, I didnt check any other measurements, but can anyone give me a set that wont rub the bolt?

From what I heard, 114.3x5 9 or 9.5 with 265/35/22 will fit without problems. Can anyone confirm this? I know TIS makes their wheels specifically to fit perfectly, which are 115x5 right? Anywho, before I purchase $1000 rims, I'd just like an idea.

Does anyone know how much a set of 4 265/35/22 would cost? And what company tires should I be looking at?

"22x9.5" with a 5X114.3"

http://cgi.ebay.com/ebaymotors/ws/e...em=7980386415&category=43960#ebayphotohosting
1 - 2 of 48 Posts
5 X 115 is our bolt patter. 5 X 114.3 is for the 300M
lexball50 said:
Man get those damn wheels. I have both two sets of black wheels off ebay for my 300C and I have not had any problems with it. My tires are 265/35/22 perilli's. the offset is +15 and the wheels are 22 x 9.5. If the wheels that you are getting match that, then buy them. If you search ebay and lowrider magazine a little more you can get those same wheels for about $200 bucks cheaper. Hope this helps

Did you see the bolt pattern in the ad says? Are your rims 5X114.3 bolt pattern?
1 - 2 of 48 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top