Chrysler 300C & SRT8 Forums banner

side door trim removal...

2152 Views 7 Replies 7 Participants Last post by  Lik2race
I would like to remove the trim on the sides of my 06 srt8. Does anyone know if there are any holes that would need to be filled or how much of a pain in the a** this would be?
1 - 1 of 8 Posts
not sure if this has been posted elsewhere, but i found this site on the web with a nice step by step and pics.

I used a $30 heat gun from Home Depot and an old credit card. Make sure not to use detailing compounds or heavy polishes on new paint -bad idea (I used to own a car detailing company years ago).

Removing both side mouldings took me about 30 minutes.

The end result is classic.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.