Chrysler 300C & SRT8 Forums banner
1 - 12 of 12 Posts

· Registered
Joined
·
173 Posts
Discussion Starter · #1 · (Edited)
Stage 1 Complete! (Pics Included)

Got the car back from my stereo guy, and in the mean time my rims arrived, so I changed her into her new attire and snapped some pics...

Here are pics of Stage 1 of my car!

22" Asanti AF 113 - 8.5" (3.5" Lip) Front / 10" (5" Lip) Rear

E&G Heavy Mesh Grille (Emblem Undecided)

20% Tint

Clifford Alarm w/ Remote Start

JL Audio 12w7 Subwoofer powered by a JL Audio 1000/1 Amplifier

Right now they just made the box for the woofer, no finishing or anything. The Sub and any other part of the box will take up the right side of the trunk. Sub Faces the Rear and will have a plexi window w/ neon when you fold down the rear seat(see pics (unfinished)). Also mounted the amp in trunk so I could use the sub.



Stage 2:

Install MB Quart QSD Components powered by JL Audio 500/4 Amp

Dynamat

Mount / Display / Install Amps, Cap, Crossovers etc. in trunk

Suede & Bucket the seats...
 

Attachments

· Premium Member
Joined
·
5,268 Posts
415_300C, looks great.

A couple of things I really like:

Good quality Pirelli tyres (not cheap & crappy Asian jobs)
Wheel/tyre fills the guards nicely
Nice finish on the Tyres.
Nice shine on car

Good one
 

· Registered
Joined
·
922 Posts
LQQking Good!

That looks good 415_300C! Keep up the greaaaaaaaaat work! :) Also thanks for the pics!
 

· Registered
Joined
·
173 Posts
Discussion Starter · #9 ·
WannaB, they are underneath the fenders from above, but when you look from the side they start to show 1/3 of the way down the wheel as the flare starts to head into the body exposing the wheels.

I'll snap some pics of the flushness once it gets light out in about a hour. stay tuned
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top