Trouble codes
Join the discussion
Recommended Reading
-
Engine upgrade suggestions
1st Gen SRT8-Specific General DiscussionSo car recently had a rod knock issue and I was sitting on it to weigh my options whether to sell it or fix it. Its definitely an expensive repair. My love for the car got the better of me so it's being repaired. Well the engine is open. Is there any key things I should possibly do for a little...- 22
- 2K
-
Kuckle · updated
-
SRT8 AMG brake conversion?
1st Gen SRT8-Specific General DiscussionThought I make a general post, in case someone has knowledge to share regarding AMG brake conversion? I gather that the callipers fit on the srt8 front end (not RT). To get the rotors to fit, was it a simple matter of machine engineering the AMG rotors to correct the pcd, centre bore and what...- 25
- 6K
-
badgx · updated
-
How do you get to Front Dashboard Speakers?
1st Gen SRT8-Specific General DiscussionHey there! I have the 07 SRT8 with kicker audio. There are what it seems to be 3 front speakers (hence the speaker grilles on the dashboard). Anyways how do you get to these speakers since one of them finally blew? Can you pry the grilles off and then remove the speaker that? I just don't want...- 4
- 262
-
DSP P0300 code Misfire high rev range
1st Gen SRT8-Specific General DiscussionHi, Apologies to you guys if this issue has been asked and resolved on other threads but I did try to search and have not found anything that aligns to my issues. Right out of the gate, I will mention that I have a Procharger installed running at 6 PSI. The problem is that I am having a P0300...- 3
- 211
-
Steering Knuckle Assembly Keeps Catching Strut Assembly While Turn the wheel.
1st Gen SRT8-Specific General DiscussionHey there guys. My father and I had to do some overhauling on the control arms on my 300. I replaced the upper control arms and replaced the lower forward ball joints that need to be pressed out of the steering knuckle. These parts are Manufacturer by Mevotech by the way, and are not original...- 0
- 116
Join now to ask and comment!