[dantodd]

Has anyone used the TVandNav2go.com solution? How well does it work? I would rather do a little soldering than have to send my unit away for updating.

thanks,
Dan

 

[domoftvandnav2go]

Hi Dan
If you don't mind soldering I can give you the unit for $200. The unit comes with instruction and pictures, so yes you can do it youself. The unit has 2 inputs 1 for dvd and 1 for backup camera. The unit auto switches to backup camera when you put the car in reverse.
Thanks Dominic of www.TVandNav2Go.com :wave:

Has anyone used the TVandNav2go.com solution? How well does it work? I would rather do a little soldering than have to send my unit away for updating.

thanks,
Dan

 

[JonW]

$200 sounds like a pretty good deal for those capable of opening their NAV unit to do the soldering. I might have to look at this to integrate with my CANBUS AUX adapter I'm building. I could enable selecting DVD display and audio right from the steering wheel - that would be sweet!

Dom 2 FYI's -
1. The forum here will frown upon your promoting items to sell unless you are a supporting vendor. (sounds like they might have room to promote another NAV/DVD vendor though...)
2. You may want to clean up the test posting on your website's forum - it doesn't give a professional impression.

 

[domoftvandnav2go]

Hi
We are now a sponsored vendor. feel free to call me at 718-763-7367.
Thanks Dominic of www.tvandnav2go.com :wave:

$200 sounds like a pretty good deal for those capable of opening their NAV unit to do the soldering. I might have to look at this to integrate with my CANBUS AUX adapter I'm building. I could enable selecting DVD display and audio right from the steering wheel - that would be sweet!

Dom 2 FYI's -
1. The forum here will frown upon your promoting items to sell unless you are a supporting vendor. (sounds like they might have room to promote another NAV/DVD vendor though...)
2. You may want to clean up the test posting on your website's forum - it doesn't give a professional impression.

 

[Northern Rider]

Welcome aboard, Dominic.

Good to see a new vendor in this category.

 

[HaTaX]

Dominic,VERY interested at the $200 price tag... How many leads need to be soldered? Under 10? If you have done of the the REC units before, did you take a picture? If so I'd like to ask you to email it to me so I can see where it needs to be done... Have done quite a bit of solder work before and would just like to take a peek at it.

Thanks! If it looks good, you'll get an order from me right away!

 

[kidcoastal]

$200 sounds like a pretty good deal for those capable of opening their NAV unit to do the soldering. I might have to look at this to integrate with my CANBUS AUX adapter I'm building. I could enable selecting DVD display and audio right from the steering wheel - that would be sweet!

Dom 2 FYI's -
1. The forum here will frown upon your promoting items to sell unless you are a supporting vendor. (sounds like they might have room to promote another NAV/DVD vendor though...)
2. You may want to clean up the test posting on your website's forum - it doesn't give a professional impression.

Ohh man, how's that... fully integrated with steering wheel controls.. hmmmm. I'm going to wait to see what Jon has up his sleeve before I go with this.

 

[domoftvandnav2go]

TV/DVD on the Nav Screen

Hi
You have to solder 4 wires and cut 4 traces. The instructions comes with a color picture of where to solder. If you are handy you will have NO problems Feel free to call me at 718-763-7367
Thanks Dominic of www.TVandNav2Go.Com :wave:

Dominic,VERY interested at the $200 price tag... How many leads need to be soldered? Under 10? If you have done of the the REC units before, did you take a picture? If so I'd like to ask you to email it to me so I can see where it needs to be done... Have done quite a bit of solder work before and would just like to take a peek at it.

Thanks! If it looks good, you'll get an order from me right away!

 

[hollywood]

what comes in the $200 kit?

 

[domoftvandnav2go]

TV/DVD on your front screen

Hi
The mod and the cable. Everyhting you need except a DVD player. Feel free to call me at 718-763-7367.
Thanks Dominic of www.TVandNav2Go.com :wave:

what comes in the $200 kit?

 

[jhelmuth]

Dom,

How do I take advantage of the $200 offer... I'm interested.

Jim

 

[Ghetto Prince]

So am I.

 

[domoftvandnav2go]

TV/DVD on your Nav screen

Hi
The mod will cost you $200. You must be good at soldering to do this mod. If you are not, we can do the whole job for you including the mod for $425.
Feel free to call us at 718-763-7367.
Thanks Dominic of www.TVandNav2Go.com :wave:

So am I.

 

[Mike5959]

Hi
The mod will cost you $200. You must be good at soldering to do this mod. If you are not, we can do the whole job for you including the mod for $425.
Feel free to call us at 718-763-7367.
Thanks Dominic of www.TVandNav2Go.com :wave:

I talked to Dom on the phone last week and he is a great guy. I haven't bought my NAV mod yet but I will be buying it from him. the directions are pretty clear and easy!

 

[hollywood]

i'm gonna order..

Hi
The mod and the cable. Everyhting you need except a DVD player. Feel free to call me at 718-763-7367.
Thanks Dominic of www.TVandNav2Go.com :wave:

i'll call you on tuesday morning....get one ready to ship....

 

[JonW]

I spoke with Dominic and I'm getting one of his units for testing. I'll see what it takes to get this into production as an integrated CANBUS device to be controlled directly from the factory controls. Stay tuned!:banana:

I'm also receiving a Chrysler VES unit this week for testing so I should have no problems creating a device to emulate the VES unit. Although I bought this device to do the testing, I should mention that member "BO's RT" sent me a message this weekend willing to ship me his VES unit for testing and development. How's that for member support! Thanks Bo!

 

[Mike5959]

I spoke with Dominic and I'm getting one of his units for testing. I'll see what it takes to get this into production as an integrated CANBUS device to be controlled directly from the factory controls. Stay tuned!:banana:

I'm also receiving a Chrysler VES unit this week for testing so I should have no problems creating a device to emulate the VES unit. Although I bought this device to do the testing, I should mention that member "BO's RT" sent me a message this weekend willing to ship me his VES unit for testing and development. How's that for member support! Thanks Bo!

That would be HUGE! I can't wait for your results. Its a good thing we have some smart enthusiasts companies won't look at this shit without HUGE $$ backing them with guaranteed sales.