Joined
·
4 Posts
I have a 2019 300 touring with uconnect 4c and was wondering how to soft reset/reboot the unit. I still want to retain my current settings. Any help would be appreciated
Uconnect 4c soft reset
Join the discussion
Recommended Reading
-
Need help
General DiscussionOk hello everyone I have a 2006 Chrysler 300c heritage model 5.7 hemi I’ve had a rebuild trans put in it ran good for about 6 months then kind of putted and seemed like the car was in neutral turned it off started up ran for about 30 secs then did the same thing goes into hear them stops and...- 6
- 98
-
Programming for new gears and possible abs work around.
General DiscussionHey guys, I could really use some help. So I put a v6 rear end in my 2005 chrysler 300c. I thought that would be the hard part. You guys who have changed axel ratios, which programmer did you use to correct the computer, or how did you make it all happy? I tried a hypertech speedo tool but...- 21
- 529
-
Greg N · updated
-
2005 300C rumbling/humming noise
General DiscussionHi. My 300C makes an annoying growling or humming noise when i am pushing lightly on the gas to maintain speed or when cruise control is on. If i let off of the gas or give it more gas, it goes away but comes right back. It wasnt doing this everytime i drove it when i bought it in march but gas...- 0
- 70
-
Door locks will not work unless car is running
General DiscussionGood day.. I have a 2006 300c and the door locks and trunk release will not work unless the car is RUNNING.. I checked for loose wires in the door boot, check fuses and nothing seems wrong.. Any help would be appreciated!- 0
- 93
-
2010 300 Touring trunk release
General DiscussionHi- my trunk is not opening with the key fob or the trunk release button. I do not hear anything near the trunk release when the button is pressed. Where is the location of the fuse and what type of fuse do I need? Thanks!- 0
- 89
-
Kpmcmullin · updated
Join now to ask and comment!