[300cvirgin]

Hello folk. It's been a while since I have been hanging with ya'll. I still got my 300c. So I have been rolling on a spare standard alloy for abyear now and have finally decided to get an alloy. I have startech monostar 20" x 9. It seems that the offset is 21 but it's damn near impossible to make out. I have bought some that came off a Chrysler! Stupid me thought it would fit. Trns out Chrysler have all kinds of fitments.

Question:. I have my wheels and bought a 9 x 20 et35. We are not sure but the seller believes they came from a Voyager that has 5x127. Is there a way I can get these on my car?

 

[MADDOG]

your stud spacing is 5 x 115 so those won't work\ without an adapter which will probably push them too far out.

If your car is not an AWD then the offset for a 20x9 would be about a +20mm.

 

[300cvirgin]

The wheels I have on the rest of the car may say 21et. So I need 5x115 to 5x127 adapter and about 13 to 16 mm spacer. Is it possible to buy these?

 

[MADDOG]

21 is fine. It's only 1 mm difference. Don't forget the adapter will add some addtional offset width when installed.

You'll have to do some research on the adapter availability.